New York's Electro-Mech sales and shipping record - which refers to every scoreboard and accessory display the company logged as shipped to a New York organization - shows basketball as the state's leading sport at 229 orders. Baseball follows at 145; football accounts for 53. The LX2655 and LX2350 are the two most common models in New York, at 55 and 52 records respectively.

Pre-LX models still outnumber LX-series scoreboards across the full state dataset. For New York buyers, that fact carries a practical implication. A console predating the 2012 LX transition is not forward compatible with an LX-series scoreboard. Replacing the display typically means replacing the console as well.

I lead support services at Electro-Mech. Organizations from Friends Academy on Long Island to Cooperstown Dream Park in central New York appear in the state's record, representing the range of schools, recreation programs, and sports venues that have ordered from Electro-Mech since the late 1990s.

What does the New York Electro-Mech sales and shipping record actually show?

Our sales and shipping records for New York count 483 orders across 219 cities, placing the state 13th of 50 nationwide by volume shipped from our Wrightsville, Georgia facility.

A comparison of 483 New York orders reveals a market that is far more state-wide than most people assume. Of those 483 records, 419 are scoreboards and 64 are accessory displays - shot clocks, play clocks, practice segment timers, and locker room clocks. Because accessory displays typically ship in pairs, the state accounts for 543 individual displays in all. Two model lines account for more than a fifth of the scoreboard total on their own: the LX2655 at 55 records and the LX2350 at 52 are the top models in the state by LX-equivalent grouping, which means the pre-LX 2655, the 2655-C, and the current LX2655 all count as one family. The LX2160 - a shot clock set, not a scoreboard - follows at 31 records, with the LX1060 at 25 and the LX2330 at 19, as of September 2026.

New York ranks 13th in Electro-Mech's nationwide record of 24,786 orders. That figure tells you the scope of the record; it does not tell you the condition of each scoreboard today. These are records of what was sold and shipped, snapshotted August 17, 2026. The record does not say why any scoreboard was bought, what it replaced, or whether it is still in active service. Some orders remain in storage for months or years after shipment. Where the record is silent, I will say so rather than speculate.

A common assumption is that New York's scoreboard purchases are concentrated in New York City schools and recreation centers. The reality is different. The 219 cities and towns in the record include Long Island communities, Hudson Valley schools, Southern Tier venues, and upstate facilities - the five boroughs are present but they are not the whole story. That geographic spread matters for a buyer in, say, Bay Shore or Johnson City: your neighbors are very likely running Electro-Mech equipment, which means parts, console compatibility, and service experience are all within reach.

The record also spans 26 years, from 1999 to 2025. That range matters because Electro-Mech completed its full switch to LX-series scoreboards in 2012. Orders placed before that year are pre-LX models, built on different electronics with different console requirements. A facility whose scoreboard predates 2012 is almost certainly running pre-LX equipment. That distinction shapes every subsequent question about replacement, compatibility, and what a new purchase actually requires.

Which Electro-Mech scoreboards appear most in New York gyms and fields?

Basketball accounts for 229 of New York's 483 Electro-Mech records - nearly half of all orders. The LX2655 at 55 records and the LX2350 at 52 lead the state's overall count by LX-equivalent grouping.

Our sales and shipping records show basketball is by far the dominant sport in New York's record. Of 419 scoreboard records in the state, 229 are basketball. Baseball follows at 145, football at 53, and other sports at 56. That distribution makes sense to me when I look at the state's density of school gymnasiums, recreation centers, and community programs. The gym is often the busiest athletic space a school or parks department operates, and it is frequently the first facility to need a new scoreboard.

The LX2655 and LX2350 dominate the state record for a reason: both are among Electro-Mech's established indoor models and have been shipping since the early LX years. The exact sport coverage and digit heights for a specific unit depend on its model configuration - those figures come from the individual spec sheet for that model and variant, and they differ between them. In practice, confirming those details with our team before ordering is the right approach rather than relying on a general description of the model family.

The LX2160 - a shot clock set, not a standalone scoreboard - appears 31 times in New York's record. Shot clocks ship as a set. The LX1060 follows at 25 records and the LX2330 at 19. These five model families together account for 90 distinct models recorded across the state, meaning buyers had a wide range of configurations available across this period.

Console compatibility deserves attention in this context. Older consoles are not forward compatible with LX-series scoreboards. A New York facility replacing pre-LX equipment will almost always need a new console alongside the new scoreboard. CX consoles through version 402 are mostly backward compatible with older scoreboards; the reverse is not true. The takeaway: before ordering a replacement scoreboard, verify whether your existing console can drive the new unit. What this means in practice is that a scoreboard purchase and a console purchase often go together when equipment dates from before 2012.

About four of five Electro-Mech customers today choose the ScoreLink RF wireless console system. In a gym, wireless eliminates the need to route a control cable and lets the operator position the console wherever it is most practical. The display typically outlasts the console, and the console can be replaced independently when needed.

How do New York buyers decide between the LX2655 and LX2350?

Sport count and display configuration are the starting point. Both models appear in nearly equal numbers across the state record, which tells you that either can fit the right application - the question is which one fits yours.

The LX2655 leads New York's record with 55 orders; the LX2350 follows at 52. I see this balance across a wide range of organizations, from independent schools on Long Island to municipal recreation programs upstate. Both are indoor multi-sport scoreboards. The difference that matters to a buyer is the specific sport and feature configuration they need from the console - and that conversation is best had directly with the Electro-Mech team rather than inferred from a model number alone.

Console selection is the related decision. Most buyers today choose the ScoreLink RF wireless system over a hardwired cable run, regardless of which display model they select. The console pairs with either scoreboard and can be replaced independently if it reaches end of service before the display does. For a facility already running a pre-LX display, the retrofit question - whether a wireless receiver can be added - is worth raising before committing to a full replacement.

What do New York buyers need to know about outdoor football scoreboards for high school stadiums?

Football accounts for 53 of 483 New York records - the third-largest sport in the state's Electro-Mech sales and shipping record, behind basketball and baseball.

Football's 53 records represent about 11 percent of all scoreboard orders in the state. That is a smaller share than basketball or baseball, but it is not a marginal one. Outdoor football scoreboards appear across all parts of the state: Long Island schools, upstate districts, suburban programs, and urban parks all have football orders on record. The geographic spread of those 53 orders across 219 cities and towns means Electro-Mech has shipped outdoor football scoreboards to most corners of New York.

One point that comes up frequently in conversations with New York schools considering a football scoreboard replacement involves the pre-LX equipment in the state. Football scoreboards from before 2012 are pre-LX models. The primary job of any scoreboard is keeping and displaying accurate information - score and time - for players and officials. When that equipment starts to fail, the replacement decision involves more than selecting a new scoreboard: compatibility between an older console and a new LX-series scoreboard is not guaranteed. Older consoles are generally not forward compatible with LX-series scoreboards. Retrofit receivers can extend the functional life of an older display, but that option applies to the display, not to the console's ability to run new LX equipment.

Outdoor football scoreboards also carry different installation requirements than gym scoreboards. They mount on steel posts set in concrete footings, using clamp assemblies, two per post, with the top cabinet installed first. The control console is portable - it is not installed on the post or wired into the structure. Most customers today run ScoreLink RF wireless, which means no buried control cable and no conduit to run between the control position and the scoreboard. Where a cable run is needed, the correct cable is a shielded two-conductor cable with a drain line, laid directly in a trench with a burial jacket, and kept in a separate trench from power runs. The takeaway: wireless is simpler and is chosen by about four of five Electro-Mech customers.

For outdoor applications, digit height is the decision that most directly determines whether the scoreboard does its job. Electro-Mech recommends 25 feet of viewing distance per inch of digit height - a tighter standard than the sign industry's general 50 feet per inch - because a scoreboard carries captions and period indicators that must be read alongside the score. Minimum outdoor digit height is 11 inches. In practice, the farthest seat in a small high school stadium is typically 400 feet or more from the scoreboard, which sets a floor on the digit height a school should be considering.

Console compatibility reference for pre-LX scoreboards

Compatibility runs in one direction. Forward is not the same as backward.

• CX console, firmware through v402: mostly backward compatible with pre-LX scoreboards
• Pre-LX console (any version): not forward compatible with LX-series scoreboards
• Wireless receiver retrofit: available for some pre-LX models, extending service life without full replacement

How long do Electro-Mech LED scoreboards last in outdoor stadiums?

Electro-Mech's LEDs are rated for 100,000 hours of service. The earliest LX-series scoreboards began shipping in 2011, meaning some of the LX equipment in New York's record is now in its 13th or 14th year of active use.

Fixed-digit LED scoreboards are built for a service life measured in decades, not years. That durability is built into the product's design: the display cabinet sits outdoors year-round through northeastern winters and summer heat, while the control console is portable and stored indoors between uses. Because the console spends most of its time under cover and the display does not, the display typically outlasts the control console. The two components can be replaced independently - a facility that needs a new console does not necessarily need a new scoreboard, and vice versa.

The New York record illustrates this pattern well. Our sales and shipping records show orders from across the full range of 1999 to 2025. Some of the equipment from the early 2000s was pre-LX, running on older LDM and MP electronics. Electro-Mech completed its full switch to LX-series in 2012. The first LX baseball scoreboards shipped in 2011. In practice, that means the youngest pre-LX equipment in New York is now roughly 13 to 14 years old, and some of the pre-LX orders from the early 2000s are more than 20 years out from their original ship date. Many are still in service.

What this means for a buyer weighing a replacement decision: the display's lifespan is not the primary driver of replacement in most cases. Equipment is more commonly replaced because the electronics need updating, the console is no longer serviceable, the facility is expanding, or the digit height no longer meets the venue's needs as the program has grown. The display outlasts most of those other factors. A realistic planning horizon for a new Electro-Mech LED scoreboard is well beyond 20 years of service, which makes the initial selection decision worth doing carefully.

For a New York buyer whose neighbors are running pre-LX equipment - and our sales and shipping records for the state show 90 distinct model families across 483 orders going back to 1999 - the relevant question is not how long the display will last. It is whether the electronics and console can still be supported. When that answer becomes no, the scoreboard and console replacement decision arrives together, not in sequence.

Why does pre-LX equipment still outnumber LX scoreboards across New York?

Scoreboards outlast most capital planning windows. A facility that purchased before 2012 typically holds the same display for a decade or more.

The geographic distribution in the state's sales and shipping record reflects how school and municipal purchasing actually works. Brooklyn accounts for 26 records; the Bronx accounts for 19. On Long Island, Bay Shore appears 19 times, Locust Valley 14 times, and Farmingdale 14 times. These concentrations are not the result of one school buying many scoreboards over the years. They reflect multiple organizations within a tight geography - school districts, recreation departments, and youth leagues - arriving at the same manufacturer through local referrals and shared contractor relationships. C & L Electric appears in the New York record as a contractor serving multiple organizations across a region, a pattern common in markets where one reliable local installer drives a cluster of orders.

Individual buyer history makes the durability argument directly. Crown Heights Charter School, Friends Academy, Nyack College, Shelter Island High School, and Manhasset High School each hold multiple records in New York's dataset. A second or third scoreboard from the same manufacturer, ordered years after the first, is specific evidence: the earlier purchase held up long enough that the organization trusted the same source again. In my experience, facilities with tight capital budgets and limited maintenance staff do not return to the same company for a second purchase unless the first performed reliably.

Greater Binghamton Sports Complex and Cooperstown Dream Park both appear in the state's record alongside neighborhood school districts. These are venues where timing accuracy is operational. Games run on published schedules, and a failing scoreboard disrupts players and officials alike. Their presence alongside ordinary school gyms shows the breadth of organizations Electro-Mech has supplied across New York. In practice, a pre-LX scoreboard still running in a New York gym is not automatically due for replacement. What matters is whether the console remains serviceable and whether a wireless receiver retrofit can extend its useful life.

Electro-Mech offers over 180 standard models across all sports - scoreboards, timers, and other displays. When replacement does arrive, a matched option is available for almost any sport and venue combination in the state.

The New York record supports one consistent conclusion: Electro-Mech fixed-digit displays last. The pre-LX base persists not because New York facilities resist change but because the outdoor displays are still running. The console, stored indoors between uses, is more likely to reach the end of its service life first. That asymmetry is where most replacement conversations begin.

For a New York buyer whose pre-LX console is aging, I'd recommend confirming compatibility with the current CX console line before planning a full replacement. A matched console and ScoreLink RF wireless system often extends the display's useful life without a full capital outlay. When replacement does make sense, Electro-Mech's support team can help select the right model for the sport and the facility. Every scoreboard is built to order. Lead time is typically four to six weeks, and a custom configuration carries no automatic time penalty.