1550 LED Baseball Scoreboard

FUNCTIONS AND FEATURES

Model 1550 Outdoor Scoreboard is designed to present information pertinent to baseball or softball. Presentation includes:

a. Guest and Home Scores by Inning with Runs up to 9 in each of ten Innings. Each of these twenty digits is 15 inches tall.

b. Guest and Home Total Runs to 99. Total Runs digits are 15 inches tall.

c. Guest and Home Total Hits to 99. Total Hits digits are 15 inches tall.

d. Guest and Home Total Errors to 9. Total Errors digits are 15 inches tall.

e. Batter Number to 99. Batter digits are 18 inches tall.

f. Ball Count to 3. The Ball digit is 18 inches tall.

g. Strike Count to 2. The Strike digit is 18 inches tall.

h. Out Count to 2. The Out digit is 18 inches tall.

i. Hit and Error indicators.

j. Error Position to 9. Error Position digit is 15 inches tall.

ACCESSORIES

A. Standard accessories.

1. Control Console.

a. Supports all features of Electro-Mech 15x0 series of baseball scoreboards (including Models 1530, 1550 and 1580) without the need to enter codes or other information to configure the device.

b. Constructed of a heavy-duty ABS plastic housing holding a 0.1-inch thick keypad panel with stainless steel metal dome switches that provide tactile feedback and are rated for one million actuations.

c. Requires one standard grounded 120 VAC electrical outlet.

2. Extension Cables: 10-foot long shielded data cable with male stereo connectors at each end allows control console to be connected to a junction box (or ScoreLink transmitter) at the point of operation and later unplugged for storage.

3. Junction Box: Provides a point of termination for the data cable with a stereo socket for quick connection to the control console (for systems with hardwired data cable).

4. Mounting hardware: Standard mounting hardware allows the scoreboard cabinet to be clamped at any height along the support posts without the need for drilling holes or fabricating brackets onsite. Standard hardware accommodates round pipes, I-beams, or other post styles with an exterior cross-section no greater than seven inches. Optional hardware may be substituted where local codes require larger posts.

5. Interconnect Cabling: Data and power are transmitted from the lower scoreboard cabinet to the upper scoreboard cabinets via a set of provided cables.

B. Optional accessories.

1. Data Cable: A shielded two-conductor cable with a drain line is the typical means of providing a path for data from the control console to the scoreboard.

2. ScoreLink Wireless RF Modem System: This RF communications system may be substituted for the data cable at the time of installation or as a replacement for the cable at any time after the installation. ScoreLink requires a standard electrical outlet for the transmitter at the point of operation.

3. ID Panels.

a. Top and bottom ID panels are typically mounted on the same posts as the main scoreboard above and below it.

b. ID panels may be purchased blank or with simple text, multi-colored text and graphics, or screen-printed processed-color logos applied to their faces.

4. Carrying Case For Control Console: Included with the ScoreLink system, this option is also available for scoreboards with hard-wired data cables.

5. Team Name In Place of "HOME".

See complete specifications