Scoreboard 8650 Manual: Mechanical Installation

MECHANICAL INSTALLATION

The mechanical installation includes mounting the scoreboard on the wall and attaching the optional bottom sponsor panel (if purchased) to the scoreboard.

Mounting the Scoreboard

The following steps describe how to mount the scoreboard on the wall:

1. Rotate the hanger brackets so that they protrude past the top of the scoreboard and tighten the bolts.
   1. Be sure to mount the center of the scoreboard close enough to the wall receptacle so that you can plug in the 6 ft. power cord.
   2. Figure 1 shows the mounting point locations for model 8650.

Figure 1  Model 8650 Mounting Points

Figure 2 shows the mounting point locations for model 8650 with side sponsor panel.

Figure 2  Model 8650 with Side Sponsor Panel Mounting Points

Attaching the Optional Bottom Sponsor Panel

Two attachment plates, four bolts, and four washers are provided to attach the sponsor panel to the bottom of the scoreboard.  The attachment points are located on the sides of the scoreboard and sponsor panel cabinets.  The following steps describe how to attach the sponsor panel to the scoreboard:

1. Raise the sponsor panel to the bottom of the scoreboard.
2. Fasten an attachment plate to the right side of the scoreboard and sponsor panel using the provided washers and bolts as shown in figure 3.
   1. Fasten the other attachment plate to the left side of the scoreboard and sponsor panel in the same manner.

Figure 3  8650 with Bottom Sponsor Panel Attached