Back to Scoreboard 3580 Manual Next Chapter

3580 FOOTBALL SCOREBOARD SPECIFICATIONS

 

GENERAL: This ETL listed scoreboard includes the scoreboard cabinet, a horn, mounting hardware, control console, 10 ft. extension cable, and junction box.

 

DIMENSIONS:  3580: 32’ L x 10’ H x 6” D (two sections which measure 32’ L x 5’ H x 6” D)

 

WEIGHT: 3580: 880 lbs  (The top section weighs 452 lbs, the bottom section weighs 428 lbs)

 

SCOREBOARD CONSTRUCTION:  The scoreboard consists of two sections.  The outer frame is made from extruded aluminum.  Internal structural parts may be extruded aluminum or formed from aluminum sheet.  The face and back are made from aluminum sheet.  The face and masks are finished with enamel paint.  Black is the standard color.  The captions are white exterior grade vinyl.

 

DISPLAY: The 3580 football scoreboard displays HOME and GUEST scores, BALL ON, and YDS. TO GO to 99, TIME to 99 minutes and 59 seconds (99:59), DOWN and QTR to 4, TIME OUTS to 3, and Possession indicators.

 

DIGITS AND INDICATORS:  Red light emitting diodes mounted on printed circuit boards form the digits and indicators.  The clock digits are 30” tall.  The TIME OUTS digits are 18” tall.  All other digits are 24” tall.  Light emitting diodes arranged in the shape of a football form the possession indicators.

 

POWER REQUIREMENTS:  Scoreboard - 120 VAC, 3.6 A, 60 Hz.  Control Console - 120 VAC, 0.5 A, 60 Hz

 

SCOREBOARD ELECTRONICS:  100% solid state fully enclosed.

 

CONTROL CONSOLE:  The control console features a microprocessor, 37 key sealed membrane keypad, a LCD display, an attached 6 foot power cord, and two super capacitors to retain game information.  The console housing consists of ABS plastic base and top pieces with a steel back plate.

 

CONTROL CABLE:  The cable has two 22 AWG stranded copper conductors with semi-rigid PVC insulation.  It also has a braided shield and a foil shield.  The polyethylene jacket is rated at 300 volts.  The cable is direct burial rated and measures approximately ¼” in diameter.  This item is sold separately from the scoreboard.

 

JUNCTION BOX AND EXTENSION CABLE:  A 4 ¼” x 2 ¼” x 2” junction box with a ¼” stereo jack mounted on the face plate is attached to the control cable at the point of operation.  A 10 ft. extension cable connects the control console to the junction box.

 

SCORELINK 300 RF MODEM SYSTEM:  This accessory can be used in place of control cable and junction box for this scoreboard without internal modifications to the scoreboard or the control console.  Refer to the SCORELINK 300 RF MODEM SYSTEM OWNER’S HANDBOOK for more information.

 

WARRANTY:  Five year limited warranty.

 

Back to Scoreboard 3580 Manual Next Chapter