2655-4 BASKETBALL SCOREBOARD SPECIFICATIONS

GENERAL: This ETL listed four sided scoreboard includes four scoreboard cabinets, four corner pieces,   assembly hardware, control console, control cable (sold separately), 10 ft. extension cable, three      25 ft. extension cables, and junction box.

DIMENSIONS:  Approximately 13’ square at the top x 60” H x 6” D    (2655-4 with bottom sponsor panel    measures approximately 17’ square at the top L x 60” H x 6” D)

WEIGHT:  840 lbs   (2655-4 with side sponsor panel weighs 960 lbs)

SCOREBOARD CONSTRUCTION: The outer frame is made from extruded aluminum.  Internal structural parts may be extruded aluminum or formed from aluminum sheet.  The face and back are made from aluminum sheet.  The face is finished with enamel paint.  Black is the standard face color.  White is the standard color for the sponsor panel.  The captions are white on a gray background.

DISPLAY: The 2655-4 basketball scoreboard displays HOME and GUEST scores to 199, a 99:00 clock         with 1/10th of a second timing, PERIODS to 4, HOME and GUEST bonus and possession        symbols, HOME and GUEST team fouls, PLAYER NUMBER and FOULS on each side.  Each   side has an internal horn.  The volleyball and wrestling captions are mounted on reversible panels               at the bottom of the scoreboard

DIGITS AND SYMBOLS:  Light emitting diodes mounted on printed circuit boards form the digits and      symbols.  The clock is formed with 12” red digits, the HOME and GUEST scores are formed with 12” yellow digits, the PERIOD, PLAYER NUMBER and FOULS are formed with 9” green digits,    the HOME and GUEST team fouls are formed with 9” yellow digits, bonus symbols are green, the                 possession symbols and colon / decimal symbols are red.

POWER REQUIREMENTS: Scoreboard - 120 VAC, 4 A, 60 Hz (each side uses 120 VAC, 1A, 60 Hz).           Each side has an attached 6 ft power cord.  Control Console - 120 VAC, 0.5 A, 60 Hz

SCOREBOARD ELECTRONICS:  100% solid state fully enclosed.

CONTROL CABLE:  The cable has two 22 AWG stranded copper conductors with semi-rigid PVC insulation.  It also has a braided shield and a foil shield.  The polyethylene jacket is rated at 300 volts.  The cable is direct burial rated and measures approximately ¼” in diameter.  This item is sold separately from the scoreboard.

JUNCTION BOX AND EXTENSION CABLE:  A 4 ¼” x 2 ¼” x 2” junction box with a ¼” stereo jack mounted on the face plate is attached to the control cable at the point of operation.  A 10 ft. extension cable connects the control console to the junction box.

SCORELINK 200 RF MODEM SYSTEM:  This accessory can be used in place of control cable and junction box for this scoreboard without internal modifications to the scoreboard or the control console.  Refer to the SCORELINK 200 RF MODEM SYSTEM OWNER’S HANDBOOK for more information.

WARRANTY:  Five year limited warranty.