SCOREBOARD INSTALLATION

This scoreboard is designed for indoor use only.  The scoreboard arrives in eight sections:  four scoreboard cabinets and four corner pieces.  Two eyebolts are attached to the top of each cabinet.  The assembled unit is designed to be suspended from cables attached to these eight eyebolts.  The mounting bolts and washers necessary to attach the corners are provided with the scoreboard.  Installation of the scoreboard consists of joining the four scoreboard cabinets at the corners using the provided hardware, hanging the assembled scoreboard in the air at the desired height and making the proper electrical connections.

SCOREBOARD ASSEMBLY

1. It is necessary to attach each corner piece to a cabinet side that has an identical number.
2. Remove the face panel from a corner bracket.
3. It will to tilt the scoreboard cabinets to align them with the corner brackets.
4. Insert a small washer over a bolt.
5. Insert a larger washer over the bolt.
6. Pass the bolt through one of the holes inside the corner bracket and thread it into the threaded hole provided in the side of the scoreboard cabinet.
7. Install the other three bolts to the scoreboard cabinet in the same manner.
8. Attach another scoreboard cabinet to the other side of the corner bracket in the same manner.
9. Reinstall the corner bracket face panel.

10.  Repeat this process until all the scoreboard cabinets are joined together at the corners with the brackets.

11.  Connect your chains or cables to the eyebolts of the assembled scoreboard.

12.  Raise the scoreboard into the air and secure the chains or cables.