2570 BASKETBALL SCOREBOARD SPECIFICATIONS

GENERAL: This ETL listed scoreboard includes the scoreboard cabinet, mounting hardware, control console, 10 ft. extension cable, and junction box.

DIMENSIONS:  14’ L x 5’ H x 6” D (2570 with side sponsor panel measures 17’ L x 5’ H x 6” D)

WEIGHT:  190 lbs  (2570 with side sponsor panel weighs 230 lbs)

SCOREBOARD CONSTRUCTION: The outer frame is made from extruded aluminum.  Internal structural parts may be extruded aluminum or formed from aluminum sheet.  The face and back are made from aluminum sheet.  The face is finished with enamel paint.  Black is the standard face color.  White is the standard color for the sponsor panel.  The captions are white on a gray background.  The optional bottom sponsor panel is mounted on a separate extruded aluminum frame.

DISPLAY: The 2570 basketball scoreboard displays HOME and GUEST scores 0 to 199, team fouls 0 to 19, bonus and possession symbols, time outs 0 to 9, a 99:59 clock with 1/10th of a second timing below 1:00, and PERIOD 1 to 4.  It has an internal horn.

DIGITS AND SYMBOLS:  Light emitting diodes mounted on printed circuit boards form the digits and symbols.  The clock uses 16” red digits, the HOME and GUEST scores use 16” yellow digits, the PERIOD uses a 12” green digit, the 5” bonus symbols are green, the 5” possession symbols and colon / decimal symbols are red, the team fouls use 12” yellow digits, and the time outs use 12” red digits.

POWER REQUIREMENTS:  Scoreboard - 120 VAC, 1 A, 60 Hz, 120 watts.  The scoreboard has an attached 6 ft. power cord.  Control Console - 120 VAC, 0.5 A, 60 Hz

SCOREBOARD ELECTRONICS:  100% solid state fully enclosed.

CONTROL CONSOLE:  The control console features a microprocessor, 37 key sealed membrane keypad, a LCD display, and an attached 6 foot power cord.  The console housing consists of ABS plastic base and top pieces with a steel back plate.

CONTROL CABLE:  The cable has two 22 AWG stranded copper conductors with semi-rigid PVC insulation.  It also has a braided shield and a foil shield.  The polyethylene jacket is rated at 300 volts.  The cable is direct burial rated and measures approximately ¼” in diameter.  The cable is sold separately from the scoreboard.

JUNCTION BOX AND EXTENSION CABLE:  A 4 ¼” x 2 ¼” x 2” junction box with a ¼” stereo jack mounted on the face plate is attached to the control cable at the point of operation.  A 10 ft. extension cable connects the control console to the junction box.

SCORELINK 200 RF MODEM SYSTEM:  This accessory can be used in place of control cable and junction box for this scoreboard without internal modifications to the scoreboard or the control console.  Refer to the SCORELINK 200 RF MODEM SYSTEM OWNER’S HANDBOOK for more information.

WARRANTY:  Five year limited warranty.