2556 BASKETBALL SCOREBOARD SPECIFICATIONS

GENERAL: This ETL listed scoreboard includes the scoreboard cabinet, mounting hardware, two control consoles, two 10 ft. extension cables, and two junction boxes.

DIMENSIONS:  214” L x 6’ H x 6” D  (The optional bottom sponsor panel measures 214” L x 21” H x 6” D)

WEIGHT:  lbs   (The optional bottom sponsor panel weighs 75 lbs)

SCOREBOARD CONSTRUCTION: The outer frame is made from extruded aluminum.  Internal structural parts may be extruded aluminum or formed from aluminum sheet.  The face and back are made from aluminum sheet.  The face is finished with enamel paint.  Black is the standard face color.  White is the standard color for the sponsor panel.  The captions are white on a gray background.  The optional bottom sponsor panel is mounted on a separate extruded aluminum frame.

DISPLAY: The 2556 basketball scoreboard displays HOME and GUEST scores 0 to 199, team fouls 0 to 19, bonus and possession symbols, time outs 0 to 9, player number 0 to 99, fouls 0 to 99, and points 0 to 99 for six players, a 99:59 clock with 1/10th of a second timing below 1:00, and PERIOD 1 to 4.  It has an internal horn.

DIGITS AND SYMBOLS:  Light emitting diodes mounted on printed circuit boards form the digits and symbols.  The clock uses 12” red digits, the HOME and GUEST scores use 12” yellow digits, the PERIOD uses a 9” green digit, 3” bonus symbols are green, the 3” possession symbols and colon / decimal symbols are red, the team fouls use 9” yellow digits, the time outs use 9” red digits, the player numbers use 6” red digits, the player fouls use 6” green digits, and the player points use 6” yellow digits.

POWER REQUIREMENTS:  Scoreboard - 120 VAC, 3.3 A, 60 Hz.  The scoreboard has an attached 9 ft. power cord.  Control Consoles - 120 VAC, 0.5 A, 60 Hz each

SCOREBOARD ELECTRONICS:  100% solid state fully enclosed.

CONTROL CONSOLES:  Each control console features a microprocessor, 37 key sealed membrane keypad, a LCD display, and an attached 6 foot power cord.  The console housing consists of ABS plastic base and top pieces with a steel back plate.

CONTROL CABLES:  Each cable has two 22 AWG stranded copper conductors with semi-rigid PVC insulation.  It also has a braided shield and a foil shield.  The polyethylene jacket is rated at 300 volts.  The cable is direct burial rated and measures approximately ¼” in diameter.  Two control cables needed for installation.  The cable is sold separately from the scoreboard.

JUNCTION BOXES AND EXTENSION CABLES:  A 4 ¼” x 2 ¼” x 2” junction box with a ¼” stereo jack mounted on the face plate is attached to each control cable at the point of operation.  10 ft. extension cables connect the control consoles to the junction boxes.

SL-230 / 330 RF MODEM SYSTEM:  This accessory can be used in place of control cable and junction box for this scoreboard.  Refer to the SL-230 / 330 RF MODEM INSTALLATION MANUAL for more information.

WARRANTY:  Five year limited warranty.