2350-4 BASKETBALL SCOREBOARD SPECIFICATIONS

GENERAL: This ETL listed four sided scoreboard includes four scoreboard cabinets, four corner pieces,   assembly hardware, control console, control cable (sold separately), 10 ft. extension cable, three      25 ft. extension cables, and junction box.

DIMENSIONS:  Approximately 12’ square at the top x 36” H x 6” D    (2350-4 with side sponsor panel          measures approximately 15’ square at the top L x 36” H x 6” D)

WEIGHT:  580 lbs   (2350-4 with side sponsor panel weighs 640 lbs)

SCOREBOARD CONSTRUCTION: The outer frame is made from extruded aluminum.  Internal   structural parts may be extruded aluminum or formed from aluminum sheet.  The face and back    are made from aluminum sheet.  The face is finished with enamel paint.  Black is the standard                face color.  White is the standard color for the sponsor panel and captions.

DISPLAY: The 2350-4 basketball scoreboard displays HOME and GUEST scores to 199, a 99:00 clock         with 1/10th of a second timing, PERIODS to 4, HOME and GUEST bonus and possession symbols       on each side.  Each side has an internal horn.

DIGITS AND SYMBOLS:  Light emitting diodes mounted on printed circuit boards form the digits and      symbols.  The clock is formed with 12” red digits, the HOME and GUEST scores are formed with 12” yellow digits, the PERIOD is formed with a 9” green digit, bonus symbols are green, the       possession symbols and colon / decimal symbols are red.

POWER REQUIREMENTS: Scoreboard - 120 VAC, 4 A, 60 Hz (each side uses 120 VAC, 1A, 60 Hz).           Each side has an attached 6 ft power cord.  Control Console - 120 VAC, 0.5 A, 60 Hz

SCOREBOARD ELECTRONICS:  100% solid state fully enclosed.

CONTROL CONSOLE:  The microprocessor control console is constructed of a rugged plastic housing with a metal back plate.  It features a 37 key sealed membrane keypad, a LCD display of game        information, an attached 6 foot power cord, and a lithium cell battery backup to retain game           information.

CONTROL CABLE:  The cable has two 22 AWG stranded copper conductors with semi-rigid PVC             insulation.  It also has a braided shield and a foil shield.  The polyethylene jacket is rated at 300               volts.  The cable measures approximately ¼” in diameter.  One length is required to run from the                 scoreboard to the point of                operation.

JUNCTION BOX AND EXTENSION CABLE:  A 4 ¼” x 2 ¼” x 2” junction box with a stereo jack                mounted on the face is attached to the control cable at the point of operation.  A ten foot extension            cable connects the control console to the junction box.

WARRANTY:  Five year limited warranty.