MODEL 2150 SHOT TIMER SPECIFICATIONS

GENERAL: Customers normally purchase a set of two shot timers.  This ETL listed product includes the two shot timers, a hand held unit, two 10 ft. extension cables, and two junction boxes.  It may be purchased with or without a control console.

DIMENSIONS:  24” L x 27” H x 6”

WEIGHT: 30 lbs

CONSTRUCTION: The outer frame is made from extruded aluminum.  Internal structural parts are formed from aluminum sheet.  The face and back are made from aluminum sheet.  The face is finished with enamel paint.  Black is the standard face color.  Limited mounting hardware is included.

DISPLAY: The model 2150 shot timer is a two digit counter which can be set from 1 to 99 seconds.  It has an internal horn.

DIGITS:  Light emitting diodes mounted on printed circuit boards form the 12” red digits.

POWER REQUIREMENTS:  Shot Timer - 120 VAC, 0.5 A, 60 Hz.  The shot timer has an attached 8 ft. power cord.  Control Console - 120 VAC, 0.5 A, 60 Hz

SHOT TIMER ELECTRONICS:  100% solid state fully enclosed.

CONTROL CONSOLE:  The control console features a microprocessor, 37 key sealed membrane keypad, a LCD display, an attached 6 foot power cord, and either a lithium cell battery or two super capacitors to retain game information.  The console housing consists of ABS plastic base and top pieces with a steel back plate.

CONTROL CABLE:  The cable has two 22 AWG stranded copper conductors with semi-rigid PVC insulation.  It also has a braided shield and a foil shield.  The polyethylene jacket is rated at 300 volts.  The cable is direct burial rated and measures approximately ¼” in diameter.  One length is required to run from each unit to the point of operation.  This item is sold separately from the shot timer.

JUNCTION BOX AND EXTENSION CABLE:  A 4 ¼” x 2 ¼” x 2” junction box with a ¼” stereo jack mounted on the face plate is attached to each control cable at the point of operation.  A 10 ft. extension cable connects the control console to each junction box.

SCORELINK 200 RF MODEM SYSTEM:  This accessory can be used in place of control cable and junction box for this shot timer without internal modifications to the shot timer or the control console.  Refer to the SCORELINK 200 RF MODEM SYSTEM OWNER’S HANDBOOK for more information.

WARRANTY:  Five year limited warranty.