MODEL 2106 LOCKER ROOM CLOCK SPECIFICATIONS

GENERAL: This ETL listed product includes the locker room clock, 10 ft. extension cable, and junction box.  It may be purchased with or without a control console.

DIMENSIONS:  27.25” L x 17.75” H x 6”

WEIGHT: 20 lbs

CONSTRUCTION: The outer frame is made from extruded aluminum.  The face and back are made from aluminum sheet.  The face is finished with enamel paint.  Black is the standard face color.

DISPLAY: The model 2106 locker room clock is a 99:59 clock.  If it is connected to the control console that operates a compatible basketball scoreboard, the locker room clock will display the same time as the basketball scoreboard.

DIGITS AND SYMBOLS:  Light emitting diodes mounted on printed circuit boards form the 6” red digits.  The colon is made of vinyl.

POWER REQUIREMENTS:  Locker Room Clock - 120 VAC, 0.2 A, 60 Hz.  The locker room clock has an attached 6 ft. power cord.  Control Console - 120 VAC, 0.5 A, 60 Hz

SCOREBOARD ELECTRONICS:  100% solid state fully enclosed.

CONTROL CONSOLE:  The control console features a microprocessor, 37 key sealed membrane keypad, a LCD display, and an attached 6 foot power cord.  The console housing consists of ABS plastic base and top pieces with a steel back plate.

CONTROL CABLE:  The cable has two 22 AWG stranded copper conductors with semi-rigid PVC insulation.  It also has a braided shield and a foil shield.  The polyethylene jacket is rated at 300 volts.  The cable is direct burial rated and measures approximately ¼” in diameter.  One length is required to run from each unit to the point of operation.  This item is sold separately from the locker room clock.

JUNCTION BOX AND EXTENSION CABLE:  A 4 ¼” x 2 ¼” x 2” junction box with a ¼” stereo jack mounted on the face plate is attached to each control cable at the point of operation.  A 10 ft. extension cable connects the control console to each junction box.

WARRANTY:  Five year limited warranty.