SPECIFICATIONS

GENERAL: Customers normally purchase a set of two player statistics panels.  This ETL listed product includes the two player statistics panels, mounting hardware, two control consoles, two 10 ft. extension cables, and two junction boxes.

DIMENSIONS:  4’ L x 5’ H x 6” D

WEIGHT:  70 lbs

CONSTRUCTION: The outer frame is made from extruded aluminum.  Internal structural parts may be extruded aluminum or formed from aluminum sheet.  The face and back are made from aluminum sheet.  The face is finished with enamel paint.  Black is the standard face color.  The captions are white on a gray background.

DISPLAY: The 2057 player statistics panel displays player number 0 to 99, fouls 0 to 9, and points 0 to 99 for the five players currently in the game.

DIGITS AND SYMBOLS:  Light emitting diodes mounted on printed circuit boards form the digits and symbols.  The player numbers use 6” red digits, the player fouls use 6” green digits, and the player points use 6” yellow digits.

POWER REQUIREMENTS:  Model 2057 - 120 VAC, 0.3 A, 60 Hz.  The model 2057 has an attached 6 ft. power cord.  Control Consoles - 120 VAC, 0.5 A, 60 Hz each

ELECTRONICS:  100% solid state fully enclosed.

CONTROL CONSOLE:  The control console features a microprocessor, 37 key sealed membrane keypad, a LCD display, and an attached 6 foot power cord.  The console housing consists of ABS plastic base and top pieces with a steel back plate.

CONTROL CABLE:  The cable has two 22 AWG stranded copper conductors with semi-rigid PVC insulation.  It also has a braided shield and a foil shield.  The polyethylene jacket is rated at 300 volts.  The cable is direct burial rated and measures approximately ¼” in diameter.  This item is sold separately from the scoreboard.

JUNCTION BOX AND EXTENSION CABLE:  A 4 ¼” x 2 ¼” x 2” junction box with a ¼” stereo jack mounted on the face plate is attached to the control cable at the point of operation.  A 10 ft. extension cable connects the control console to the junction box.

SCORELINK 200 RF MODEM SYSTEM:  This accessory can be used in place of control cables and junction boxes for this scoreboard without internal modifications to the model 2057 or the control consoles.  Two sets of transmitters and receivers are needed for installation.  Refer to the SCORELINK 200 RF MODEM SYSTEM OWNER’S HANDBOOK for more information.

WARRANTY:  Five year limited warranty.