Back to Scoreboard 1550 Manual Next Chapter

1550 BASEBALL SCOREBOARD SPECIFICATIONS

 

GENERAL: This ETL listed scoreboard includes the scoreboard cabinet, mounting hardware, control console, control cable (sold separately), 10 ft. extension cable, and junction box.

 

DIMENSIONS:  26’ L x 9’ H x 6” D (top cabinet: 26’ x 4’ x 6”, bottom cabinet: 26’ x 5’ x 6”)

 

WEIGHT: 800 lbs (top cabinet: 300 lbs, bottom cabinet: 500 lbs)

 

SCOREBOARD CONSTRUCTION:  The scoreboard consists of two cabinets.  The frame is made from extruded aluminum.  The face and back are made from aluminum sheet.  The face and masks are finished with enamel paint.  Black is the standard color.  The captions are white on a gray background.

 

DISPLAY: The 1550 scoreboard displays inning by inning scores from 1 to 10 for the GUEST and HOME teams, total RUNS and HITS to 99, total ERRORS to 9, BATTER number to 99, BALLS, STRIKES, OUTS, HIT, and ERROR.

 

DIGITS AND INDICATORS:  Red light emitting diodes mounted on printed circuit boards form the digits and indicators.  The BATTER number, BALL, STRIKE, OUT digits are 18” tall.  The inning scores, total RUNS, HITS, and ERRORS digits, hit (H) indicator, and error (E) indicator are 15” tall.

 

POWER REQUIREMENTS:  Scoreboard - 120 VAC, 3.2 A, 60 Hz.  Control Console - 120 VAC, 0.5 A, 60 Hz

 

SCOREBOARD ELECTRONICS:  100% solid state fully enclosed.

 

CONTROL CONSOLE:  The control console features a microprocessor, 37 key sealed membrane keypad, a LCD display and an attached 6 foot power cord.  The console housing consists of ABS plastic base and top pieces with a steel back plate.

 

CONTROL CABLE:  The cable has two 22 AWG stranded copper conductors with semi-rigid PVC insulation.  It also has a braided shield and a foil shield.  The polyethylene jacket is rated at 300 volts.  The cable is direct burial rated and measures approximately ¼” in diameter.  This item is sold separately from the scoreboard.

 

JUNCTION BOX AND EXTENSION CABLE:  A 4 ¼” x 2 ¼” x 2” junction box with a ¼” stereo jack mounted on the face plate is attached to the control cable at the point of operation.  A 10 ft. extension cable connects the control console to the junction box.

 

SCORELINK 300 RF MODEM SYSTEM:  This accessory can be used in place of control cable and junction box for this scoreboard without internal modifications to the scoreboard or the control console.  Refer to the SCORELINK 300 RF MODEM SYSTEM OWNER’S HANDBOOK for more information.

 

WARRANTY:  Five year limited warranty.

 

Back to Scoreboard 1550 Manual Next Chapter