SCOREBOARD OPERATION

SCOREBOARD STARTUP

1. Place the power disconnect for the scoreboard in the ON position.
2. Plug one end of the 10 ft. extension cable into ¼” stereo jack on the junction box.
3. Plug the other end into the ¼” stereo jack mounted on the control console back plate.
4. Plug the control console power cord into a grounded NEMA 5-15R 120 VAC receptacle.

GAME TIME OPERATION

This scoreboard is operated with a 15-key control console.  Figure 11 shows the keypad layout on the control console.

Figure 11  Keypad Layout

The scoreboard will display:

GUEST SCORE – 0

HOME SCORE – 0

CLOCK – 30:00

Control Console Key Functions

1. GUEST +1 – This key increments the Guest score by 1.
2. GUEST +10 – This key increments the Guest score by 10.
3. HOME +1 – This key increments the Home score by 1.
4. HOME + 10 – This key increments the Home scores by 10.
5. DOWN – This key increments the DOWN indicators.
6. In baseball / softball this key increments the INNING digits by 1.
7. In baseball / softball this key increments the BALL indicators.
8. In baseball / softball this key increments the STRIKE indicators.
9. In baseball / softball this key increments the OUT indicators.

10.  CLOCK ON/OFF – This key toggles the clock on and off.  When the clock is on (counting down), a red LED on the keypad above this key is illuminated.  The horn sounds for two seconds when the game clock reaches 0 seconds.

11.  MIN -1 – This key decreases the clock by one minute.

12.  SEC +1 – This key increases the clock by one second.

13.  SEC -1 – This key decreases the clock by one second.

14.  CLOCK RESET – This key is used to cycle the clock between the 15, 30, 60, and 90 minutes settings.

15.  NEW GAME – This key can be used to reset all scoreboard functions.  Press NEW GAME and, within two seconds, press CLOCK RESET.

Select the sport that the control console is going to be used in by moving the toggle switch on the control console backplate to the BASEBALL position for baseball / softball or the FOOTBALL position for football / soccer.  Reset the control console by pressing NEW GAME and, within two seconds, pressing CLOCK RESET.

You should reset the scoreboard each time that it is turned on.  Test out all the functions to ensure that the scoreboard is operating properly.

SCOREBOARD SHUTDOWN

1. Place the power disconnect for the scoreboard in the OFF position.
2. Unplug the control console power cord.
3. Unplug the 10 ft. extension cable.
4. This unit is not waterproof.

Proper scoreboard shutdown will help protect the scoreboard and control console from power surges and lightning strikes.