SCOREBOARD OPERATION

SCOREBOARD STARTUP

1. Place the power disconnect for the scoreboard in the ON position.
2. Plug one end of the extension cable into ¼” stereo jack on the junction box or the ScoreLink 300 Transmitter, if purchased.
3. Plug the other end into the ¼” stereo jack mounted on the control console back plate.
4. Plug the control console power cord into a grounded NEMA 5-15R 120 VAC receptacle.
5.  If a ScoreLink 300 RF MODEM SYSTEM is installed with this scoreboard, plug the wall mount DC power supply into a grounded NEMA 5-15R 120 VAC receptacle and the male plug on the end of the attached cable into the Power jack on the Transmitter.

GAME TIME OPERATION

This scoreboard is operated with a 15-key control console.  Figure 11 shows the keypad layout on the control console.

Figure 11  Keypad Layout

The scoreboard will display:

GUEST SCORE – 0

HOME SCORE – 0

INNING – 0

CLOCK – 15

Control Console Key Functions

1. GUEST +1 – This key increments the Guest score by 1.
2. HOME +1 – This key increments the Home score by 1.
3. GUEST +10 – This key increments the Guest score by 10.
4. HOME + 10 – This key increments the Home scores by 10.
5. INNING – This key will increment the Inning by 1.
6. BALLS – This key will increment the Ball count by 1.
7. STRIKES – This key will increment the Strike count by 1.
8. OUTS – This key will increment the Out count by 1.
9. The clock will display 15 minutes.

10.  CLOCK RESET – This key is used increment the clock in 30 minute intervals.  This will allow the clock to be set up to 9 hours and 30 minutes.

11.  CLOCK ON / OFF – This key toggles the clock on and off.  The clock displays hours and minutes until the last minute, when it displays seconds.  The horn will sound when the clock reaches 0 seconds.

12.  DEC. MIN. – This key decreases the clock by one minute.

13.  DEC. SEC. – This key decreases the clock by one second.

The HIT and ERROR keys are not used with the 1341 scoreboard.

You should reset the scoreboard each time that it is turned on.  Test out all the functions to ensure that the scoreboard is operating properly.

SCOREBOARD SHUTDOWN

1. Place the power disconnect for the scoreboard in the OFF position.
2. Unplug the control console power cord.
3. Unplug the extension cable.
4. If a ScoreLink 300 RF MODEM SYSTEM is installed with this scoreboard, unplug the Transmitter’s wall mount power supply.
5. These units are not waterproof.

Proper scoreboard shutdown will help protect the scoreboard and control console from power surges and lightning strikes.