SCOREBOARD SPECIFICATIONS

GENERAL:  This ETL listed scoreboard includes the scoreboard cabinet, mounting hardware, control console, 10 ft. extension cable, and junction box.

DIMENSIONS:  16’ L x 5’ H x 6” D   (1070 with a side sponsor panel measures 20’ L x 5’ H x 6” D, 1070 with two side sponsor panels measures 24’ L x 5’ H x 6” D)

WEIGHT:  250 lbs   (1070 with a top sponsor panel weighs 380 lbs, 1070 with a side sponsor panel weighs 295 lbs, 1070 with two side sponsor panels weighs 340 lbs.)

SCOREBOARD CONSTRUCTION:  The outer frame is made from extruded aluminum.  Internal structural parts may be extruded aluminum or formed from aluminum sheet.  The face and back are made from aluminum sheet.  The face and masks are finished with enamel paint.  Black is the standard color.  The captions are white exterior grade vinyl.

DISPLAY:  The 1070 baseball scoreboard displays HOME and GUEST scores to 99, INNINGS (INNING) to 19, BALLS (BALL), STRIKES (STRIKE), OUTS (OUT), HIT (H), and ERROR (E).

DIGITS AND INDICATORS:  Red light emitting diodes mounted on printed circuit boards form the digits and indicators.  The digits are 18” tall.  Circular clusters of light emitting diodes form the 4” diameter BALL, STRIKE, OUT, HIT, and ERROR indicators.

POWER REQUIREMENTS:  Scoreboard - 120 VAC, 0.8 A, 60 Hz  Control Console - 120 VAC, 0.5 A, 60 Hz

SCOREBOARD ELECTRONICS:  100% solid state fully enclosed.

CONTROL CONSOLE:  The control console features a microprocessor, 15 key sealed membrane keypad, and an attached 6 foot power cord.  The console housing consists of ABS plastic base and top pieces with a steel back plate.

CONTROL CABLE:  The cable has two 22 AWG stranded copper conductors with semi-rigid PVC insulation.  It also has a braided shield and a foil shield.  The polyethylene jacket is rated at 300 volts.  The cable is direct burial rated and measures approximately ¼” in diameter.  This item is sold separately from the scoreboard.

JUNCTION BOX AND EXTENSION CABLE:  A 4 ¼” x 2 ¼” x 2” junction box with a ¼” stereo jack mounted on the face plate is attached to the control cable at the point of operation.  A 10 ft. extension cable connects the control console to the junction box.

SL-230 / 330 RF MODEM SYSTEM:  This accessory can be used in place of control cable and junction box for this scoreboard.  Refer to the SL-230 / 330 RF MODEM INSTALLATION MANUAL for more information.

WARRANTY:  Five year limited warranty.