SPECIFICATIONS

GENERAL: This ETL listed softball timer includes the softball timer cabinet, mounting hardware, control console, 10 ft. extension cable, and junction box.

DIMENSIONS:  70” L x 48” H x 6” D

WEIGHT:  50 lbs

CONSTRUCTION:  The outer frame is made from extruded aluminum.  Internal structural parts may be extruded aluminum or formed from aluminum sheet.  The face and back are made from aluminum sheet.  The face is finished with enamel paint.  Black is the standard color.  The captions are white exterior grade vinyl.

DISPLAY:  The 1064 softball timer displays TIME to 90 minutes.

DIGITS:  Red light emitting diodes mounted on printed circuit boards form the digits.  The digits are 18” tall.

POWER REQUIREMENTS:  Softball timer - 120 VAC, 0.4 A, 60 Hz.  Control Console - 120 VAC, 0.5 A, 60 Hz

SOFTBALL TIMER ELECTRONICS:  100% solid state fully enclosed.

CONTROL CONSOLE:  The control console features a microprocessor, 15 key sealed membrane keypad and an attached 6 foot power cord.  The console housing consists of ABS plastic base and top pieces with a steel back plate.

CONTROL CABLE:  The cable has two 22 AWG stranded copper conductors with semi-rigid PVC insulation.  It also has a braided shield and a foil shield.  The polyethylene jacket is rated at 300 volts.  The cable is direct burial rated and measures approximately ¼” in diameter.  This item is sold separately from the softball timer.

JUNCTION BOX AND EXTENSION CABLE:  A 4 ¼” x 2 ¼” x 2” junction box with a ¼” stereo jack mounted on the face plate is attached to the control cable at the point of operation.  A 10 ft. extension cable connects the control console to the junction box.

SL-230 / 330 RF MODEM SYSTEM:  This accessory can be used in place of control cable and junction box for this scoreboard.  Refer to the SL-230 / 330 RF MODEM INSTALLATION MANUAL for more information.

WARRANTY:  Five year limited warranty.