2180 LED Basketball Scoreboard

FUNCTIONS AND FEATURES

Model 2180 Shot Clock Set is designed to present information pertinent to basketball and other indoor sports. Presentation includes:

a. Four-digit Game Clock that can count up in MM:SS format, count down in MM:SS or SS.T format, or show time of day in HH:MM format. Game Clock digits are 6 inches tall and made from green LEDs.

b. Two-digit Shot Clock that can count down from 99 seconds. Shot Clock digits are 12 inches tall and formed from red LEDs

c. Two integrated Visual Horn Indicators made from red LEDs.

d. Integrated Horn.

e. Two dedicated 120 VAC outputs for optional visual horn indicators.

ACCESSORIES

A. Standard accessories.

1. Control Console.

a. Often deleted from 2180 package when the customer is purchasing or already owns an Electro-Mech basketball scoreboard with a control console that will support shot clocks.

b. Supports all features of Electro-Mech 2000 series basketball scoreboards without the need to enter codes or other information to configure the device. Player stat panels require separate custom control consoles.

c. Provides direct data outputs for up to four scoreboards, shot clocks, or locker room clocks all synchronized to the data (including the time) generated by the control console. Additional displays may be controlled in synchronization by daisy chaining from the data outputs of scoreboards connected to the control console.

d. Constructed of a heavy-duty ABS plastic housing holding a 0.1-inch thick keypad panel with stainless steel metal dome switches that provide tactile feedback and are rated for one million actuations.

e. Requires one standard grounded 120 VAC electrical outlet.

2. Hand-held Shot Clock Controller.

a. Plugs into connector on control console.

b. Allows an operator to control the shot clocks during the game without touching the main control console.

3. Extension Cable: 10-foot long shielded data cable (one per display) with male stereo connectors at each end allows control console to be connected to junction boxes (or ScoreLink transmitters) at the point of operation and later unplugged for storage.

4. Junction Boxes: Provide a point of termination for the data cables with a stereo sockets for quick connection to the control console.

5. Stereo Plugs With Pigtail: Provide connectors to be spliced onto the data cables at the scoreboard end.

6. Mounting hardware: Each shot clock has mounting points in the back of the cabinet allowing the unit to be attached to a pole or other vertical member up to seven inches outer diameter. In addition, the sides of each cabinet contain mounting points to allow for alternate hardware to be provided by the customer. The manufacturer provides mounting hardware for clamping each cabinet to a pole using the rear mounting points. The manufacturer also provides a set of bolts and washers for attaching customer-provided hardware to the side mounting points.

B. Optional accessories.

1. Data Cable: A shielded two-conductor cable with a drain line is the typical means of providing a path for data from the control console to the scoreboard. The Model 2180 is a set of two shot clocks, and will therefore require two runs of data cable.

2. ScoreLink Wireless RF Modem System: This RF communications system may be substituted for the data cable at the time of installation or as a replacement for the cable at any time after the installation. ScoreLink requires a standard electrical outlet for the transmitter at the point of operation and another for the receiver at the scoreboard. The Model 2180 is a set of two shot clocks and will therefore require two ScoreLink receivers (in addition to one transmitter) for complete elimination of data cables.

3. Carrying Case For Control Console: Included with the ScoreLink system, this option is also available for scoreboards with hard-wired data cables.

See complete specifications